Nortel DMS-100 Series Maintenance Manual page 577

8
WARNING
Improper insertion may damage circuit packs
Do not apply direct pressure to the components.
Do not force the cards into the slots.
Open the locking levers on the replacement card. Align the card with the slots
in the shelf and gently slide the card into the shelf.
9 Seat and lock the card.
a. Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure that the card is fully seated in the shelf.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Common card replacement procedures 8-259
Replacing a card
RLCM
(continued)