Nortel DMS-100 Series Maintenance Manual page 277

26
CAUTION
If you do not allow the time required for the system to
clear the alarm, a false alarm indication can occur.
Allow 3 to 5 min for the system to clear the alarm
before you proceed to the next step.
To identify the P-side links that have faults, type
>TRNSL P
and press the Enter key.
Example of a MAP response:
LINK 0: RMM 0 0;CAP MS;STATUS:SysB,;MSGCOND: CLS
LINK 1: RMM 0 1;CAP MS;STATUS:SysB,;MSGCOND: CLS
LINK 2: ESA 0 0;CAP
LINK 4: ESA 0 1;CAP
27 To busy the link that has faults, type
>BSY LINK link_no
and press the Enter key.
where
link_no is the number of a P-side link identified in step 26
28 To test the ManB link, type
>TST LINK link_no
and press the Enter key.
where
link_no is the number of the link (0 or 1) made manually busy in step 27
If test
passes
fails
S;STATUS:
S;STATUS:
DMS-100 Family RLCM Maintenance Manual XPM12 and up
RLCM alarm clearing procedures 7-93
major
OK,;MSGCOND: OPN
OK,;MSGCOND: OPN
Do
step 29
step 35
RMM
(continued)