Nortel DMS-100 Series Maintenance Manual page 337

76 Load the ESA processor by typing
>LOADPM
and pressing the Enter key.
77 Return the ESA to service by typing
>RTS
and pressing the Enter key.
If ESA processor
RTS passed
RTS failed
78 The next action depends on your reason for performing this procedure
If you were
directed to this procedure from a
maintenance procedure
not directed to this procedure from
a maintenance procedure
79 Return to the maintenance procedure that sent you to this procedure and
continue as directed.
80 For further assistance, contact the personnel responsible for the next level of
support.
81 You have completed this procedure.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-19
RLCE RLCE
Do
step 78
step 80
Do
step 79
step 81
NT0X91 NT0X91
(continued) (end)