Nortel DMS-100 Series Maintenance Manual page 519

27 Reload the RMM by typing
>LOADPM
and pressing the Enter key.
If
load failed
load passed
28 Return the RMM unit to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
29 Go to the TTP level of the MAP and post the RMM by typing
>TRKS;TTP;POST P RMM rmm_no
and pressing the Enter key.
where
rmm_no is the number of the RMM shelf in which the card is to be replaced
30 Return to service the circuits busied in step 5 by typing
>RTS ALL
and pressing the Enter key.
If RTS
passed
failed
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-201
RMM
Do
step 33
step 28
Do
step 29
step 33
Do
step 31
step 33
NT6X74
(continued)