Nortel DMS-100 Series Maintenance Manual page 208

7-24 RLCM alarm clearing procedures
RLCM RG
critical
(continued)
11
12
If the SWRG command
passes, and a switch of RG activity
must occur for the other unit
passes, and RG activity is acceptable
for both units
fails
13
297–8351–550 Standard 04.01 August 1999
To return the LCM unit to service, type
>RTS UNIT unit_no
and press the Enter key.
unit_no is the number of the ManB LCM unit (0 or 1)
If RTS
passes
fails
To align RG activity to the new RG, type
>SWRG UNIT unit_no
and press the Enter key.
where
unit_no is the LCM unit (0 or 1) associated with the new RG
Example of a MAP display:
LCM REM1 14 1 Unit 1 SWRG Passed
Repeat step 12 for the other LCM unit.
Do
step 19
step 12
Do
step 13
step 13
step 18