Nortel DMS-100 Series Maintenance Manual page 545

Summary of replacing an NTEX54 in an RLCM
Busy the DBIC
at the xEMS
Post the PM at
the MAP
Busy the
logical drawer
Remove power
from the
drawer
Replace the
card
Apply power to
the drawer
Test the logical
drawer
Return the
logical drawer
to service
Update table
LCMDRINV with
new MAC address
Update the
Object Attributes
at the xEMS
Return the
DBIC to service
at the xEMS
End
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-227
RLCM
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.
NTEX54
(continued)