Nortel DMS-100 Series Maintenance Manual page 268

7-84 RLCM alarm clearing procedures
Ext FSP
RLCE frame major
103
104
At the RLCE frame
105
At the MAP terminal
106
107
297–8351–550 Standard 04.01 August 1999
(continued)
Record the numbers of the LCM and RMM in the frame.
Replace the alarm and control card. Perform the correct procedure in Card
Replacement Procedures. Complete the procedure and return to this point.
Determine if the FRAME fail lamp on the FSP is lit.
If the FRAME fail lamp
is lit, and lit fail LEDs or blown
fuses are present
is lit, and lit fail LEDs or blown
fuses are not present any longer
is not lit
To access the EXT level of the MAP display, type
>MAPCI;MTC;EXT
and press the Enter key.
Determine if an FSP alarm is present.
If an FSP alarm
is present, and you did not access
all the frames with an FSP alarm
is present, and you accessed all
the frames with an FSP alarm
is not present
Do
step 2
step 112
step 106
Do
step 108
step 112
step 113