Nortel DMS-100 Series Maintenance Manual page 235

19 To attempt to return the RLCM unit to service, type
>RTS UNIT lcm_unit
and press the Enter key.
where
lcm_unit is the LCM unit that returns to service (0 or 1)
If RTS
passes
fails
20 The card list identifies the cards that have possible faults. Replace the cards
one at a time in the order listed as directed below:
If you
did not replace the last card on
the list
replaced the last card on the list
21 For additional help, contact the next level of support.
22 Go to the Card Replacement Procedures to replace the first (or next) card on
the card list. Go to step 17 when you replace the card.
23 The procedure is complete. If additional alarms display, proceed to the
appropriate alarm clearing procedure.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
RLCM alarm clearing procedures 7-51
major
Do
step 23
step 21
Do
step 22
step 21
RLCM RLCM
major
(continued) (end)