Nortel DMS-100 Series Maintenance Manual page 600

10-12 Trouble isolation and correction
In response to the command string HELP PRETRIP, the command syntax is
displayed at the MAP terminal as follows.
>help pretrip
PRETRIP : AVAILABLE RINGING PRETRIP OPTIONS
LOGS: Enable/Disable Pretrip LOG Reporting for
the posted PM or posted set of PMs.
4FR: Used to reduce Ring Pretrip occurrences on
long loop length 4FR lines.
command results in extension of the Ring
Trip filter timing for ALL lines serviced
by the posted PM or posted set of PMs.
Query: Displays the status of Pretrip options
Parms: <OPTION>
Pretrip log reports
Pretrip log reports are enabled or disabled for a posted LCM or all LCMs in
the posted set. If the LCM is in service, the effect is immediate. Otherwise,
the LCM is updated during the next RTS. You must enter one of the
following actions with the command string PRETRIP LOGS.
You can enter the following optional parameters with either of the previous
actions.
For example, to record LINE113 logs for all pretrips detected on all LCMs
in the posted set, activate the logs feature by typing
>PRETRIP LOGS ENABLE ALL
and pressing the Enter key.
297–8351–550 Standard 04.01 August 1999
Enabling this
{LOGS <ACTION> {ENABLE
DISABLE
4FR <ACTION> {ENABLE
DISABLE
QUERY}
ENABLE – This enables recording of LINE113 log reports for the
posted LCM when the system detects a pretrip.
DISABLE – This prevents any LINE113 log reports from being
generated when the system detects a pretrip on a posted LCM.
ALL – This results in the selected action being applied to all LCMs in
the posted set.
NOWAIT – This option prevents waiting for confirmation that the
command has been completed.
[<OPTION> {ALL}],
[<OPTION> {ALL}]} [<NOWAIT>{NOWAIT}],
[<OPTION> {ALL}],
[<OPTION> {ALL}]} [<NOWAIT> {NOWAIT}]