Nortel DMS-100 Series Maintenance Manual page 585

a. Remove the replacement card from its ESD container.
b. Slide the card into the shroud guide slots toward the drawer backplane.
c. Hold the front cover of the line drawer with your left hand to steady it.
d. Grasp the top and bottom edges of the card with the fingers of your right
hand.
e. Push the card toward the backplane until it plugs fully into the backplane
socket.
7 You have completed this procedure. Return to the main procedure that sent
you to this procedure and continue as directed.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement common procedures 8-267
Replacing a line card Replacing a line card
RLCM RLCM
(continued) (end)