Nortel DMS-100 Series Maintenance Manual page 490

8-172 Card replacement procedures
NT6X54
RLCM
(continued)
8
9
297–8351–550 Standard 04.01 August 1999
Busy both line subgroups associated with the LCM drawer in which the card is
being replaced by typing
>BSY DRWR
and pressing the Enter key.
Example of a MAP response;
Please confirm ("YES," "Y," "NO," or "N"):
Confirm the system prompt by typing
>YES
and pressing the Enter key.
Go to step 10.
Busy both line subgroups associated with the RLCM drawer in which the card is
being replaced by typing
>BSY DRWR lsg
and pressing the Enter key.
where
lsg is one of two line subgroups (0 through 19) associated with the drawer
Example of a MAP response:
LCM REM1 00 0 Drwr 4 will be taken out of service
Please confirm ("YES," "Y," "NO," or "N"):
Confirm the system prompt by typing
>YES
and pressing the Enter key.
Note: Repeat this step for the other line subgroup associated with the line
drawer.