Nortel DMS-100 Series Maintenance Manual page 275

12 To demount the tape drive, type
>DEMOUNT T tape_no
and press the Enter key.
where
tape_no is the number of the tape drive containing the PM load files
13 Go to step 23.
14 From office records, determine and note the number of the input/output
controller (IOC) disk. Note the name of the volume containing the PM load
files.
15 To access the disk utility level of the MAP, type
>DSKUT
and press the Enter key.
16 To list the IOC file names in the user directory, type
>LISTVOL volume_name ALL
and press the Enter key.
where
volume_name is the name of the volume containing the PM load files
obtained in step 14
17 To leave the disk utility, type
>QUIT
and press the Enter key.
18 Go to step 23.
19 From office records, determine and note the number of the system load module
(SLM) disk. Note the name of the volume containing the PM load files.
20 To access the disk utility level of the MAP, type
>DISKUT
and press the Enter key.
21 To list the SLM file names in the user directory, type
>LF volume_name
and press the Enter key.
where
volume_name is the name of the volume containing the PM load files
obtained in step 19
DMS-100 Family RLCM Maintenance Manual XPM12 and up
RLCM alarm clearing procedures 7-91
major
RMM
(continued)