Nortel DMS-100 Series Maintenance Manual page 411

At the MAP terminal
6 Test the line card just replaced by typing
>DIAG
and pressing the Enter key.
If DIAG
passed
failed
There is a new diagnostics test for NT6X18AA/AB cards. This
NT6X18 card may be good. See the NT6X18 line card description
in the general maintenance section of this book for information on
running an enhanced diagnostics.
7
Return the line card to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
8 Send any faulty cards for repair according to local procedure.
9 Record the following items in office records:
date the card was replaced
serial number of the card
symptoms that prompted replacement of the card
Go to step 11.
10
Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
ATTENTION
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-93
RLCM
Do
step 7
step 10
Do
step 8
step 10
NT6X18
(continued)