Nortel DMS-100 Series Maintenance Manual page 375

6 Use the following information to determine the next step in this procedure.
If you entered this procedure
from an alarm clearing procedure
from other procedure
At the MAP display
7 Load the RMM by typing
>LOADPM
and pressing the Enter key.
If LOADPM command
passed
failed
8 Return the RMM to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
9 Send any faulty cards for repair according to local procedure.
10 Record the following items in office records:
date the card was replaced
serial number of the card
symptoms that prompted replacement of the card
11 Go to step 14.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-57
RMM
Do
step 12
step 7
Do
step 8
step 13
Do
step 9
step 13
NT2X59
(continued)