Nortel DMS-100 Series Maintenance Manual page 442

8-124 Card replacement procedures
NT6X45
HIE
(continued)
7
8
9
10
At the MAP terminal
11
12
297–8351–550 Standard 04.01 August 1999
Load the ESA processor by typing
>LOADPM
and pressing the Enter key.
If
message "loadfile not found in
directory" is received
Load passed
Load failed
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no is the number of the tape drive containing the PM load files
Do
step 8
step 26
step 29
Do
step 9
step 15
step 20