Nortel DMS-100 Series Maintenance Manual page 205

Clearing an RLCM RG critical alarm with a ringing generator
Enter this procedure from the PM system level alarm clearing
procedures step that identifies an LCM associated fault.
At the MAP terminal
1 To silence the alarm, type
>MAPCI;MTC;PM;SIL
and press the Enter key.
2 To identify the RLCM that has faults, type
>DISP STATE ISTB LCM
and press the Enter key.
Example of a MAP response:
ISTb REM1 00 0
3 To post the ISTb RLCM identified in step 3, type
>POST LCM site frame_no lcm_no
and press the Enter key.
where
site is the name of the site of the LCM location
frame_no is the number of the frame (00 to 511)
lcm_no is the number of the LCM (0 or 1) in the frame
Example of a MAP display:
SysB ManB
PM 0 0
LCM 0 0
LCM REM1 00 0 ISTb
Unit0: SysB
Unit1: ISTb
Drwr: 01 23 45
.. .. ..
DMS-100 Family RLCM Maintenance Manual XPM12 and up
RLCM alarm clearing procedures 7-21
ATTENTION
OffL CBsy
2 0
2 0
Links_OOS: CSide
/RG: 0
/RG: 0
11 11 11 11
67 89 01 23 45 67
.. .. .. .. .. ..
RLCM RG
critical
ISTb InSv
1 12
1 9
0 PSide 0
11 RG:Pref 0 ISTb
89 Stby 1 ISTb
..
(continued)