Nortel DMS-100 Series Maintenance Manual page 398

8-80 Card replacement procedure
NT2X90 NT2X90
RMM RMM
(continued) (end)
11
12
13
14
297–8351–550 Standard 04.01 August 1999
Go to step 14.
Return to the Alarm Clearing Procedures that directed you to this card
replacement procedure. If necessary, go to the point where the faulty card list
was produced, identify the next faulty card on the list, and go to the appropriate
replacement procedure in this manual for that card.
Obtain further assistance in replacing this card by contacting personnel
responsible for higher level of support.
You have successfully completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue as
directed.