Nortel DMS-100 Series Maintenance Manual page 180

6-10 Recovery procedures
RLCM recovery procedure
16
MNAME
17
18
297–8351–550 Standard 04.01 August 1999
(continued)
To check the RLCM exit time, type
>POS RLCM_XPMESAEXIT
and press the Enter key.
Example of a MAP response:
RLCM_XPMESAEXIT
If
PARMVAL is set to zero
PARMVAL is greater than zero
Before you manually restore the RLCM from ESA, check to see if links to the
RLCM are stable. To find the link numbers for this RLCM, type
>TRNSL C
and press the Enter key.
Example of a MAP response:
Host XPM P-side link number
LTC 1 0;Cap MS;Status:OK
Link 1: LTC 1
Link 2: LTC 1
Link 3: LTC 1
To access the CARRIER level of the MAP, type
>TRKS;CARRIER
and press the Enter key.
PARMVAL
Do
step 17
Allow the system to recover the
RLCM. Go to step 27.
;MsgCon:OPN
2;Cap MS;Status:OK
3;Cap S;Status:OK
4;Cap S;Status:OK
3
;MsgCon:OPN