Nortel DMS-100 Series Maintenance Manual page 415

Replacing an NT6X19 card in an RLCM
At your current location
1 Obtain a replacement card. Ensure that the replacement card has the same
product equipment code (PEC), including suffix, as the card that is to be
removed.
At the MAP terminal
2 Access the LTP level of the MAP and post the line associated with the card to
be replaced by typing
>MAPCI;MTC;LNS;LTP;POST L site lcm lsg ckt
and pressing the Enter key.
where
site is the name of the site where the RLCM is located
lcm is the number of the RLCM with the faulty card
lsg is the number of the line subgroup with the faulty card
ckt is the number of the circuit associated with the faulty card
Example of a MAP response:
LCC PTY RNG .....LEN.......... DN
1FR REM1 00 0 03 03
3 Check the status of the posted line.
If the line status is
manual busy (ManB)
not ManB
4 Busy the line by typing
>BSY
and pressing the Enter key.
5 Go to the procedure Replacing a line card. When you have completed the
procedure, return to this point.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-97
RLCM
STA F S LTA TE RESULT
7213355 MB
Do
step 5
step 4
NT6X19
(continued)