11
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
12
Locate the tape that contains the PM load files.
13
Mount the tape on a magnetic tape drive.
14
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
15
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files.
16
Demount the tape drive by typing
>DEMOUNT T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files.
Go to step 27.
17
From office records, determine and note the number of the input/output
controller (IOC) disk and the name of the volume that contains the PM load
files.
18
Access the disk utility level of the MAP by typing
>DSKUT
and pressing the Enter key.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Card replacement procedures 8-199
RMM
Do
step 12
step 17
step 22
NT6X74
(continued)