Nortel DMS-100 Series Maintenance Manual page 192

7-8 RLCM alarm clearing procedures
RLCM
critical
(continued)
10
11
12
13
297–8351–550 Standard 04.01 August 1999
To return to service (RTS) the busied link, type
>RTS LINK link_no
and press the Enter key.
where
link_no is the number of the P-side link tested in step 9
If RTS
passes and other links that are system busy (SysB)
are not present
passes but other links are SysB
fails
To post the RLCM noted in step 4 with the alarm condition, type
>POST LCM site frame lcm
and press the Enter key.
where
site is the site name of the RLCM (alphanumeric)
frame is the frame number of the RLCM (0 to 511)
lcm is the number of the LCM unit of the RLCM
To busy both LCM units of the RLCM, type
>BSY PM
and press the Enter key.
To return to service (RTS) the PM, type
>RTS PM
and press the Enter key.
If RTS
passes
fails
Do
step 11
step 8
step 30
Do
step 37
step 30