Nortel DMS-100 Series Maintenance Manual page 482

8-164 Card replacement procedures
NT6X53
RLCM
(continued)
10
11
At the IOE frame
12
At the MAP display
13
14
15
16
17
297–8351–550 Standard 04.01 August 1999
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no is the number of the tape drive containing the PM load files.
Release the tape drive from your user directory by typing:
>DEMOUNT T tape_no
and pressing the Enter key.
where
tape_no is the number of the tape drive mounted in step 13.
Go to step 27.
From office records, determine and note the number of the input/output
controller (IOC) disk and the name of the volume that contains the PM load
files.
Do
step 11
step 17
step 22