Table of Contents
Advertisement
Wi-Fi
Configure the Wi-Fi radio's channel
By default, the Wi-Fi radio is configured to automatically select the best channel to use with respect to
other Wi-Fi networks. You can configure a specific channel to use for the Wi-Fi radio by using the
following steps.
2.4 GHz band—Channels 1 to 11 are supported. Channels 12, 13, and 14 are not supported.
n
5 GHz band—By default, only non-Dynamic Frequency Selection (DFS) channels are supported.
n
You can also enable support for DFS channels in client mode. See
support DFS channels in client mode
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. For Channel, select the channel. Only channels appropriate for the band are displayed.
IX20 User Guide
Configure the Wi-Fi radio's channel
for information about enabling DFS support.
Configure the Wi-Fi radio to
187
Advertisement
Table of Contents
