Table of Contents
Advertisement
Wi-Fi
Configure the Wi-Fi radio's channel
By default, the Wi-Fi radio is configured to automatically select the best channel to use with respect to
other Wi-Fi networks. You can configure a specific channel to use for the Wi-Fi radio by using the
following steps.
n
2.4 GHz band—Channels 1 to 11 are supported. Channels 12, 13, and 14 are not supported.
n
5 GHz band—By default, only non-Dynamic Frequency Selection (DFS) channels are supported.
You can also enable support for DFS channels in client mode. See
support DFS channels in client mode
Note
Not all Digi devices currently support 5 GHz. Before you try to use this feature, verify that
your device supports 5 GHz.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
IX20 User Guide
Configure the Wi-Fi radio's channel
for information about enabling DFS support.
Use Digi Remote Manager to view and manage your
Configure the Wi-Fi radio to
313
Advertisement
Table of Contents
