Configure The Wi-Fi Radio's Channel - Digi LR54 User Manual

Wi-Fi

Configure the Wi-Fi radio's channel

By default, each Wi-Fi radio is configured to automatically select the best channel to use with respect
to other Wi-Fi networks. You can configure a specific channel to use for a Wi-Fi radio by using the
following steps.
2.4 GHz band—Channels 1 to 11 are supported. Channels 12, 13, and 14 are not supported.
n
5 GHz band—By default, only non-Dynamic Frequency Selection (DFS) channels are supported.
n
You can also enable support for DFS channels in client mode. See
support DFS channels in client mode

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. Click to expand the appropriate Wi-Fi radio.
LR54 User Guide
Configure the Wi-Fi radio's channel
for information about enabling DFS support.
Use Digi Remote Manager to view and manage your
Configure the Wi-Fi radio to
261