Delete A Wan Or Wwan - Digi TX54 User Manual

Interfaces
IPv6 Status
IPv6 Type
IPv6 Address(es)
IPv6 Gateway
IPv6 MTU
IPv6 Metric
IPv6 Weight
IPv6 DNS Server(s)
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Delete a WAN or WWAN

Follow this procedure to delete any WANs and WWANs that have been added to the system. You
cannot delete the preconfigured WAN, WAN1, or the preconfigured WWANs, WWAN (single-cellular
models) or WWAN1 and WWAN2 (dual cellular models).

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Click the menu icon (...) next to the name of the WAN or WWAN to be deleted and select
Delete.
TX54 User Guide
: up
: dhcpv6
: fe00:2404::240:f4ff:fe80:120/64
: ff80::234:f3ff:ff0e:4320
: 1500
: 1
: 10
: fd00:244::1, fe80::234:f3f4:fe0e:4320
Wide Area Networks (WANs)
128