Environment Heater Control - Canon imageRUNNER ADVANCE C5500 Series Service Manual

Fan Warm-up
rotation
Stopped
Secondary
Transfer Ex-
haust Fan
(FM8)
*1: The state of the fan (full speed/half speed/stopped) differs depending on the detection status of the Internal Temperature
Sensor (UN22) and the Environment Sensor (UN50).
*2: The state of the fan (full speed/half speed/stopped) differs depending on the paper size.

Environment Heater Control

Condition
Power OFF
Set <Low> for power consumption during Sleep
A state in which the Control Panel is OFF after press-
ing the Energy Saver key
Standby External temperature is less than
22 deg C *1
External temperature is 22 deg C or
more *1
During print operation
*1: External temperature can be checked in service mode (COPIER> DISPLAY> ANALOG> TEMP).
Standby When a job
starts
Stopped Stopped
Reader Heater
ON
ON
ON
OFF
OFF
OFF
During a job After a job
Full speed/ Stopped
Half speed/
Stopped*2
Drum Heater
ON
ON
ON
ON
OFF
OFF
154
2. Technology
ERR/JAM Reader op-
eration
Stopped Stopped
Cassette Heater
ON
ON
ON
ON
OFF
OFF
Sleep
Stopped