Canon imageRUNNER ADVANCE C5500 Series Service Manual page 243

3. Place the 2 flags [1] of the ADF Pickup Roller Unit on the 2 guides [2] of the feeder, and insert the Pickup Roller Unit
side from above.
[2]
[1]
4. Move the shaft [2] of the ADF Pickup Roller Unit under the 2 flags [1] on the feeder side. Shift the bushing [3] while
compressing the spring, and insert the shaft [2] into the Shaft Support [4] of the feeder. (It is advisable to insert it
from the rear side.)
5. Put the shaft [1] of the ADF Pickup Roller Unit into the Shaft Support (front side) [2] of the feeder, and secure it with
the bushing [3].
6. Secure the Resin Ring on the front side.
7. Install the Feeder Inner Cover (Front) and the Feeder Inner Cover (Rear).
[1]
[2]
[3]
[2] [4]
[3]
[1]
229
4. Disassembly/Assembly