Canon imageRUNNER ADVANCE C5500 Series Service Manual page 150

■ Drive Configuration
No.
[1] Cassette 1 Pickup Roller
[2] Cassette 1 Feed Roller
[3] Cassette 1 Separation Roller
[4] Cassette 1 Pullout Roller
[5] Cassette 2 Pickup Roller
[6] Cassette 2 Feed Roller
[7] Cassette 2 Separation Roller
[8] Cassette 2 Pullout Roller
[9] Lifting Plate
■ Lifter Control
Paper inside a cassette is lifted up by the Lifting Plate.
The Lifting Plate is lifted up by rotating the Cassette 1,2 Lifter Motor (M40).
When the paper surface reaches the position of the Pickup Roller, the Cassette 1/2 Paper Surface Sensor (PS68/PS69) is turned
ON to detect that the paper has reached the pickup position.
Lifter Error Detection
When the Cassette Paper Surface Sensor is not turned ON although the Cassette Lifter Motor is driven, an alarm is issued due
to error in pickup assembly.
However, at first and second failure of paper surface detection, Trailing Edge Guide Plate error is displayed on the Control Panel
to prompt the user to open and then close the cassette.
If paper surface detection fails for 3 consecutive times, no paper is displayed for the cassette and an alarm is issued.
While an alarm has occurred, the corresponding cassette cannot be used.
<Related alarm codes>
• 04-0001: Cassette 1 Lifter Error
• 04-0002: Cassette 2 Lifter Error
■ Cassette Pickup Control
Rotation of the Cassette Pickup Motor feeds paper to the Cassette Pullout Roller.
The Cassette 1/2 Pickup Roller and the Cassette 1/2 Feed Roller are driven by the Cassette 1,2 Pickup Motor (M41) while the
Cassette 1/2 Pullout Roller is operated by the rotation of the Cassette 1/2 Pullout Motor (M42/M43).
Pickup Retry Error
Pickup retry is executed when a delay jam is detected by the Pullout Sensor of each cassette.
An alarm code is notified when pickup fails the predetermined number of times.
<Related alarm codes>
• 04-0011: Cassette 1 Pickup Retry Error
M40
[9]
Name
136
[1] [2] [4]
M41
[5] [6] [7]
No.
M40 Cassette 1,2 Lifter Motor
M41 Cassette 1,2 Pickup Motor
M42 Cassette 1 Pullout Motor
M43 Cassette 2 Pullout Motor
2. Technology
[3]
M42
M43
[8]
Name