Canon imageRUNNER ADVANCE 8105 Series Service Manual page 887

COPIER > OPTION > USER
SLP-SLCT Usage setting of network applications
Lv.2 Details With the setting to use network-related application, the machine can
be recovered through network because it does not move to sleep
mode 1.
For this machine to recover from sleep mode 1 through network,
a particular packet needs to be received; however, the existing
network-related application does not send this packet. With the
setting not to use the network-related application, this machine
cannot recover from sleep mode 1 through network when it gets into
sleep mode 1.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 0 to 1
0: Not used (Shift to sleep mode 1 is available.)
1: Used (Shift to sleep mode 1 is not available.)
Default value 0
Supplement/memo Network-related application: NetSpot Accountant, imageWARE
PS-MODE Setting of PS print line drawing
Lv.2 Details To set the line drawing processing at PS print.
In case that line width differs according to the print position, when 8
is set, PostScript interpreter automatically adjusts the line width.
Use case When right and left ruled lines are different in width
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
8: Auto adjustment of line width
0 to 7, 9 to 65535: Spare
Default value 0
8
Service Mode > COPIER > OPTION > USER
8
Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
CNCT-RLZ Setting of connection serialize function
Lv.2 Details Connection serialize is a function to assure job grouping function of
imageWARE Output Manager Select Edition V1.0.
The setting to enable this mode can avoid job rearrangement
because the machine does not receive job data from other
connection until it completes job data reception from the current
connection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo Connection: Connection to be established through network between
multiple hosts (PC, etc).
Job grouping function: A function of imageWARE Output Manager
Select Edition V1.0. This is to prevent job interruption from other PC
by group job (sending multiple jobs in 1 session at job transmission).
JA-FUNC ON/OFF of job archive function
Lv.2 Details To set ON/OFF of job archive function.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Changing this mode is not available in service mode, but reference is
available (in service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
JA-JOB Setting of job archive target job
Lv.2 Details To set the job type subject to job archive.
With the job archive function enabled, archive operation is executed
when executing the target job.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Changing this mode is not available in service mode, but reference is
available (in service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0: N/A, 3: Limited to FAX/IFAX, 0xFFFFFFFF: All jobs
Default value 0
Related service mode COPIER > OPTION > USER > JA-FUNC
8-172
8-172