Canon imageRUNNER ADVANCE 8105 Series Service Manual page 860

COPIER > OPTION > IMG-DEV
TBLTBIS+ Setting of ETB cleaning bias (+)
Lv.1 Details To set the transfer current value to apply cleaning bias (+) at the time
of ETB cleaning.
As the value is increased, the soiling of the back side of paper is
decreased, but the life of the ETB is shortened.
Compared with TBLTCLSW, productivity can be sustained, but the
life of the ETB is shortened further.
Use case When the back side of paper is soiled
Adj/set/operate method Enter the setting value, and then press OK key.
Caution As the greater value is set, the life of the ETB is shortened.
Display/adj/set range -10 to 10
Unit 10 micro A
Default value 0 (100 micro A)
Related service mode COPIER> OPTION> IMG-DEV> TBLTCLSW, TBLTBIS-, TBLTTMS
TBLTBIS- Setting of ETB cleaning bias (-)
Lv.1 Details To set the transfer current value to apply cleaning bias (-) at the time
of ETB cleaning.
Use case When the back side of paper is soiled
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Do not use this at the normal service.
Display/adj/set range 0 to 5
Unit 10 micro A
Default value 0 (-50 micro A)
Related service mode COPIER> OPTION> IMG-DEV> TBLTCLSW, TBLTBIS+, TBLTTMS
TBLTTMS Set ETB cleaning bias application times
Lv.1 Details To set the number of times to apply cleaning bias at the time of ETB
cleaning.
Apply positive (+) and negative (-) cleaning bias alternately.
As the value is increased, the soiling of the back side of paper is
decreased, but the life of the ETB is shortened and productivity is
decreased.
Use case When the back side of paper is soiled
Adj/set/operate method Enter the setting value, and then press OK key.
Caution As the greater value is set, the life of the ETB is shortened and
productivity is decreased.
Display/adj/set range 1 to 10
Unit Number of times
Default value 2
Related service mode COPIER> OPTION> IMG-DEV> TBLTCLSW, TBLTBIS+, TBLTBIS-
8
Service Mode > COPIER > OPTION > IMG-DEV
8
Service Mode > COPIER > OPTION > IMG-DEV
COPIER > OPTION > IMG-DEV
Set first idle rotn time in HH Ev
DRM-IDL3
To set the idle rotation time to be performed first time for the day in
Lv.1 Details
an HH (high temperature and high humidity) environment.
When image density for the first time of the day is low
Use case
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 20 (0: OFF)
Unit 30 seconds
Default value 1 (60 seconds)
Related service mode COPIER> OPTION> IMG-DEV> DRM-IDL, DRM-IDL2
8-145
T-8-60
8-145