4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Brush Roller
Note:
•
Be sure to keep in contact with the Grounding Plate when installing the Post-transfer
Guide.
•
Do not deform the Grounding Plate when installing the Post-transfer Guide.
4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Brush Roller
2) Remove the Connection Gear and the N-ring from the ETB Brush Roller.
3) Remove the ETB Brush Roller Unit.
•
2 Screws
x2
F-4-199
4-139
F-4-200
F-4-201
4-139