Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1297

4) Install the Conversion Connector.
CAUTION:
Be sure that there is no gap between the HDD Connector and the Conversion
Connector.
5) Fit the 2 bosses of the Connector Fixation Screw into the holes of the Conversion
Connector to install.
•
2 Screws (P Tightening; M3x8)
CAUTION:
Be sure to follow the correct order to tighten the screws; otherwise, the Conversion
Connector will be unsettled.
x2
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Assembling the Removable
F-9-679
Boss
Hole
F-9-680
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Assembling the Removable
6) Install the HDD Cover.
• 1 Claw
•
1 Screw (TP Round End; M3x6)
CAUTION：
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
7) Install the HDD Handle.
• 2 Screws (TP Round End; M3x6)
CAUTION：
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x2
9-335
F-9-681
F-9-682
9-335