Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1300

■
Installing the Encryption Board/HDD Case Unit
The following shows combination of the HDD and the Encryption Board.
<When a single HDD is installed>
•
Connect "CH A" to Slot.1 (The original HDD)
•
No HDD to Slot.2
C H
C H
<When 2 HDDs are installed>
•
Connect "CH A" to Slot.1 (The original HDD)
• Connect "CH B" to Slot.2 (The new HDD)
B
C H
A
C H
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Installing the Encryption Bo
Power Supply Cable
B
Signal Cable
A
Signal Cable
Power Supply Cable
F-9-689
Power Supply Cable
Signal Cable
Signal Cable
Power Supply Cable
F-9-690
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Installing the Encryption Bo
1) Connect the Signal Cable and the Power Supply Cable to the Encryption Board.
x2
2) Install the Encryption Board.
•
4 Screws (TP; M3x6)
x4
9-338
F-9-691
F-9-692
9-338