4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Feed Unit
3. Remove the Rear Lower Cover.
3-1)
Remove the Rear Lower Cover in the direction of the arrow.
•
3 Screws
x3
4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Feed Unit
<Procedure>
1) Open the Motor Driver Support Plate.
•
2 Screws
•
5 Connectors
•
Wire Saddle
•
Reuse Band
MEMO:
When opening the Motor Driver Support Plate, be sure to free from the protrusion.
F-4-282
2) Remove the Flywheel.
•
2 Screws
x5
x2
x2
4-166
Projection
F-4-283
F-4-284
4-166