Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1269

9) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Encryption Board.
• 2 Connectors
•
7 Wire Saddles
CAUTION:
• Secure the LED Cable in the direction of the arrow.
•
Check that the LED Cable is connected properly at the time of installation because
the machine can operate even when the cable is not connected properly.
x2
x6
9
Installation > [TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
10) Connect the 4 Connectors of the Signal Cables and the Power Supply Cables to the
Encryption Board.
•
Power Supply Cable (CH B; FK2-7837)
•
Signal Cable (CH B; FK2-7837)
• Signal Cable (CH A; FK2-7832)
•
Power Supply Cable (CH A; FK2-7832)
F-9-616
9
Installation > [TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
Power Supply Cable (CH B)
x4
CH B
CH A
Power Supply Cable (CH A)
9-307
Signal Cable (CH B)
Signal Cable (CH A)
F-9-617
9-307