Canon imageRUNNER ADVANCE 8105 Series Service Manual page 946

FEEDER > ADJUST
ADJSSCN2 Zoom adj in 2-sided vert scan way: back
To make a fine adjustment of the back side image magnification in
Lv.1 Details
vertical scanning direction at the time of DADF duplex scanning.
As the value is incremented by 1, the image is reduced by 0.1% in
vertical scanning direction.
Use case When a displacement occurs to the front/back side image
magnification at the time of duplex scanning
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -10 to 10
Unit 0.10%
Default value 0
8
Service Mode > FEEDER > FUNCTION
T-8-89
8
Service Mode > FEEDER > FUNCTION
FUNCTION
FEEDER > FUNCTION
SENS-INT Initialization of DADF Sensors
Lv.1 Details To initialize DADF Sensors.
Use case When replacing Reader Controller PCB / Post-separation Sensor 1
(SR2) / Post-separation Sensor 2 (SR3) / Post-separation Sensor 3
(PCB2) / Registration Sensor (PCB3) / Lead Sensor 1 (PCB4) / Lead
Sensor 2 (SR5)
Adj/set/operate method Select the item, and then press OK key.
MTR-CHK Specifying DADF Operation Motor
Lv.1 Details To specify the DADF Motor to operate.
The motor is activated by MTR-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 9
0: Pickup Motor (M1), 1: Feed Motor (M2), 2: Registration Motor (M3),
3: Read Motor (M4), 4: Delivery Motor (M5), 5: Disengagement Motor
1 (M6), 6: Disengagement Motor 2 (M7), 7: Tray Lifter Motor (M8), 8:
Glass Shift Motor (M9), 9: Pickup Roller Unit Lifter Motor (M10)
Related service mode FEEDER> FUNCTION> MTR-ON
TRY-A4 Adj of DADF Tray width detect ref 1: A4
Lv.1 Details To automatically adjust the paper width detection reference point 1
for the DADF Tray. (A4)
Use case - When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
TRY-A5R Adj of DADF Tray width detect ref 2: A5R
Lv.1 Details To automatically adjust the paper width detection reference point 2
for the DADF Tray. (A5R)
Use case - When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
TRY-LTR Adj of DADF Tray width detect ref 1: LTR
Lv.1 Details To automatically adjust the paper width detection reference point 1
for the DADF Tray. (LTR)
Use case - When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
TRY-LTRR Adj of DADF Tray width detect ref2: LTRR
Lv.1 Details To automatically adjust the paper width detection reference point 2
for the DADF Tray. (LTRR)
Use case - When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
8-231
8-231