Duplex Color Image Reader-C1 - Canon imageRUNNER ADVANCE 8105 Series Service Manual

Duplex Color Image Reader-C1

SR20 SR22 SR17 PCB2
PCB3 SR18 SR19 SR4 SR10
SR15 SR5 SR16 PCB5
PCB4 SR11 SR3 SR9
ACC Jam
Type Sensor Name/Description
ID Code
01 0001 DELAY Post-separation sensor 1/2/3
01 0002 STNRY Post-separation sensor 1/2/3
01 0003 DELAY Delay detection sensor
01 0004 STNRY Delay detection sensor
01 0005 DELAY Registration sensor
01 0006 STNRY Registration sensor
01 0007 DELAY Lead sensor 1
01 0008 STNRY Lead sensor 1
01 0009 DELAY Lead sensor 2
01 0010 STNRY Lead sensor 2
01 0011 DELAY Delivery sensor
01 0012 STNRY Delivery sensor
01 0042 STNRY Post-separation sensor 3
01 0043 DELAY Delay detection sensor
01 0044 STNRY Delay detection sensor
01 0045 DELAY Registration sensor
01 0046 STNRY Registration sensor
01 0047 DELAY Lead sensor 1
01 0048 STNRY Lead sensor 1
01 0049 DELAY Lead sensor 2
01 0050 STNRY Lead sensor 2
01 0051 DELAY Delivery sensor
7
Error Code > Jam Code > Duplex Color Image Reader-C1
SR12 SR6
SR2 SR7 SR8
SR1 VR
SR13
Sensor ID
SR2,SR3,PCB2
SR2,SR3,PCB2
SR4
SR4
PCB3
PCB3
PCB4
PCB4
SR5
SR5
PCB5
PCB5
SR2,SR3,PCB2
SR4
SR4
PCB3
PCB3
PCB4
PCB4
SR5
SR5
PCB5
7
Error Code > Jam Code > Duplex Color Image Reader-C1
ACC Jam
Type
ID Code
01 0052 STNRY
01 0071 TIMING NG
01 0073 HP NG
01 0074 HP NG
01 0075 HP NG
01 0090 ADF OP
01 0091 ADF OP
01 0092 COVER OP
01 0093 COVER OP
01 0094 POWER ON
01 0095 PICKUP NG
*1 The state is recovered by opening and closing the Door, or turning OFF and then ON the
power supply.
If the same jam is detected although the above operation is performed, an error code will
be notified.
*2 The state is recovered by opening and closing the Door, or turning OFF and then ON the
power supply.
F-7-2 F-7-2
If it is not recovered by the above operation, it is considered an error near the target sensor.
Disconnect and then connect the connectors around the target sensor, check if the cable is
open circuit, and replace the sensor.
Sensor Name/Description
Delivery sensor PCB5
TIMING NG
Disengaging HP sensor 1 SR15
Disengaging HP sensor 2 SR16
Pickup roller unit lifter HP sensor SR12
DADF open/closed sensor 1/2 ADF OP
DADF open/closed sensor 1/2 ADF OP
Cover open/closed sensor SR10
Cover open/closed sensor SR10
All feed sensor POWER ON
Post-separation sensor 1/2/3 SR2,SR3,PCB2
7-86
Sensor ID
T-7-16 T-7-16
7-86