Canon imageRUNNER ADVANCE 8105 Series Service Manual page 656

E Detail
Location Item
Code Code
E602 -0104 -00 Title Hard disk error
Remedy 1. Check the Cable and Power Connector.
2. If the measures above do not solve the problem, start up
in Safe Mode to perform All Format using SST and reinstall
the system (SYSTEM, LANGUAGE, RUI), and then turn
OFF and then ON the main power.
3. If the error still remains, it can be caused by HDD failure;
therefore, replace the HDD and reinstall the system.
Description Error in /FSTDEV.
E602 -0105 -00 Title Hard disk error
Remedy 1. Enter the corresponding CHK-TYPE in the partition to
execute HDD-CLEAR, and then turn OFF and then ON the
power.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
E602 -0110 -00 Title Hard disk error
Remedy Error due to data corruption or software bug.
1. Start up in Safe Mode to perform All Format using SST and
reinstall the system (SYSTEM, LANGUAGE, RUI), and
then turn OFF and then ON the main power.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
E602 -0111 -00 Title Hard disk error
Remedy This is the error which usually does not occur in Read/Write
level.
1. Check the Cable and Power Connector.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
E602 -0112 -00 Title Hard disk error
Remedy Error due to data corruption or software bug.
1. Start up in Safe Mode to perform All Format using SST and
reinstall the system (SYSTEM, LANGUAGE, RUI), and
then turn OFF and then ON the main power.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
7
Error Code > Error Code > Error Code Details > E602
Description
7
Error Code > Error Code > Error Code Details > E602
E Detail
Location Item
Code Code
E602 -0113 -00 Title Hard disk error
Remedy The document data (such as Box on the HDD) can be
damaged.
1. Enter the corresponding CHK-TYPE in the partition to
execute HDD-CHECK (duration: several minutes to several
dozen minutes); and then turn OFF and then ON the
power.
2. If the measures above do not solve the problem, enter the
corresponding CHK-TYPE in the partition to execute HDD-
CLEAR, and then turn OFF and then ON the main power.
(Use SST to perform reformat/reinstallation in the case of
the following: BOOTDEV, BOOTDEV2 and APL_SEND)
3. If the error still remains, it can be caused by HDD failure;
therefore, replace the HDD and reinstall the system.
Description Error in /FSTDEV.
E602 -0114 -00 Title Hard disk error
Remedy Error due to data corruption or software bug.
1. Start up in Safe Mode to perform All Format using SST and
reinstall the system (SYSTEM, LANGUAGE, RUI), and
then turn OFF and then ON the main power.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
E602 -0121 -00 Title Hard disk error
Remedy This is the error which usually does not occur in Read/Write
level.
1. Check the Cable and Power Connector.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
E602 -0122 -00 Title Hard disk error
Remedy Error due to data corruption or software bug.
1. Start up in Safe Mode to perform All Format using SST and
reinstall the system (SYSTEM, LANGUAGE, RUI), and
then turn OFF and then ON the main power.
2. If the measures above do not solve the problem, it can be
caused by HDD failure; therefore, replace the HDD and
reinstall the system.
Description Error in /FSTDEV.
7-42
Description
7-42