Removing The Main Controller Pcb 1 - Canon imageRUNNER ADVANCE 8105 Series Service Manual

Installation Procedure
MEMO:
Although model with the Upright Control Panel is used for illustration in this
procedure, the same procedure is applied to model with the Flat Control Panel.
■

Removing the Main Controller PCB 1

1) Press [A] part, and open the Right Rear Cover 1.
[A]
2) Remove the Side Cover.
• 1 Screw (The removed screw will be used in step 7).)
•
2 hocks
3) Disconnect the USB Cable and the Control Panel Cable.
4) Hold the handle and remove the Main Controller PCB 1 while holding the cables.
F-9-200 F-9-200
x2
Control Panel Cable
USB Cable
Main Controller PCB 1
Handle
Hook
Hook
F-9-201 F-9-201
F-9-202 F-9-202