Sensor - Canon imageRUNNER ADVANCE 8105 Series Service Manual

COPIER > DISPLAY > DENS
P-B-MAX ETB background dtct result maximum VL
Lv.2 Details To display the maximum value of ETB background detection result
by Patch Sensor.
Detection result is used for D-max control and D-half control.
Use case When any error occurs on the maximum density or gradation, identify
the cause with this mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1023
Appropriate target value 650 to 900
Related service mode COPIER> DISPLAY> DENS> P-B-AVE, P-B-MIN
P-B-MIN ETB background dtct result minimum VL
Lv.2 Details To display the minimum value of ETB background detection result by
Patch Sensor.
Detection result is used for D-max control and D-half control.
Use case When any error occurs on the maximum density or gradation, identify
the cause with this mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1023
Appropriate target value 600 to 850
Related service mode COPIER> DISPLAY> DENS> P-B-AVE, P-B-MAX
8
Service Mode > COPIER > DISPLAY > SENSOR
T-8-10 T-8-10
8
Service Mode > COPIER > DISPLAY > SENSOR
■

SENSOR

COPIER > DISPLAY > SENSOR
DOC-SZ Dis size detected by Original Size Sensr
Lv.2 Details To display the original size detected by Original Size Sensor.
Use case When checking whether the machine detects the paper on
Copyboard Glass correctly
Adj/set/operate method 1) Place the original on Copyboard Glass.
2) Close the Copyboard Cover/DADF.
3) Select the item.
Caution Unless the Copyboard Cover/DADF is closed, this is not displayed
correctly.
A, B, L configuration size
Display/adj/set range
8-39
T-8-11 T-8-11
8-39