Removing The Right Deck Pickup Unit - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Right Deck Pickup Unit

Removing the Right Deck Pickup Unit

<Preparation>
1. Remove the Right Cover.(Refer to page 4-92)
2. Pull out the Right Deck.(Refer to page 4-195)
<Procedure>
1) Open the Right Lower Cover.
2) Remove the Connector Cover.
• 1 Screw
3) Disconnect the Connectors.
4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Right Deck Pickup Unit
4) Remove the Right Deck Pickup Unit.
•
1 Screw
MEMO:
Be sure to check that the parts number of Pickup Unit is correct.
F-4-429
F-4-430
4-216
F-4-431
F-4-432
4-216