Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1080

3) Fold extra length of the CH B Cable (FK2-7837), and secure it with the 2 Wire Saddles.
CAUTION:
•
Be sure that the cable is not in contact with the stepped screw [A] of Drawer.
•
When securing the cable, be sure that it does not go over to the front.
• When the FAX Board is installed, be sure to avoid contact of the cable with the PCB
to secure the cable.
x2
[A]
4) Insert the assembled Removable HDD.
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Installing the HDD Case Unit
5) Close the Controller Box.
6) Install the Rear Upper Cover.
MEMO:
Be sure to install the 3 TP screws show in the figure below.
F-9-267
7) Install the Side Cover.
•
1 Screw
F-9-268
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Installing the HDD Case Unit
9-118
F-9-269
Hook
Hook
F-9-270
9-118