4
Parts Replacement and Clearning > Fixing > Removing the Pressure Roller Static Eliminator
2) Remove the Pressure Roller Unit.
4
Parts Replacement and Clearning > Fixing > Removing the Pressure Roller Static Eliminator
Removing the Pressure Roller Static Eliminator
<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
2. Remove the Fixing Assembly. (Refer to page 4-173)
3. Remove the Fixing Front Cover. (Refer to "Removing the Fixing Cleaning Web")
4. Separate the Fixing Upper Unit from the Fixing Lower Unit. (Refer to page 4-180)
5. Remove the Pressure Roller Unit. (Refer to page 4-184)
<Procedure>
1) Remove the Pressure Roller Static Eliminator Unit.
•
2 Screws
F-4-337
x2
4-185
F-4-338
4-185