2) Assemble the first HDD. (Use the parts disassembled in step 1).)
•
1 HDD Support Plate
•
1 HDD Connector Plate (Included with the Removable HDD Kit)
•
HDD
•
1 HDD Grounding Plate
•
4 Screws (Tighten one of the screws together with the HDD Grounding Plate)
•
1 Screw (TP Round End; M3x6) (Included with the Removable HDD Kit)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x5
TP
HDD Grounding
Plate
MEMO:
Execute steps 3) to enable mirroring function (to use 2 HDDs).
Steps 3) are not required to use encryption function only (to use a single HDD).
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Assembling the Removable
HDD
Connector
HDD Connector
Plate
HDD Support Plate
F-9-677
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Assembling the Removable
3) Purchase a HDD assigned as an option to assemble the second HDD.
•
1 HDD Support Plate
•
4 Anti-vibration Dampers
•
4 Spacers
•
1 HDD Connector Plate (Included with the Removable HDD Kit)
•
Option HDD
•
1 HDD Grounding Plate
•
4 Screws (W SEMS; M3x14) (Tighten one of the screws together with the HDD Grounding
Plate)
•
1 Screw (TP Round End; M3x6) (Included with the Removable HDD Kit)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x5
TP
HDD Grounding
Plate
9-334
Option HDD
Connector
HDD Connector Plate
(Included in Removable
HDD Kit)
HDD Support Plate
Spacer
Anti-vibration
Damper
F-9-678
9-334