Canon imageRUNNER ADVANCE 8105 Series Service Manual page 981

CAUTION: How to Hold the Developing Assembly
• When holding the Developing Assembly, be sure to hold the handle of the
Developing Assembly as shown in the figure.
•
Do not touch the shutter area of the Developing Assembly. The shutter area is
slippery, so it may cause a fall of the assembly.
9
Installation > Installation > Installing the Developing Assembly
5) Hold the Developing Assembly as shown in the figure, and align the protrusions at both
sides of the assembly with the rails on the host machine.
F-9-33 F-9-33
Protrusion
9
Installation > Installation > Installing the Developing Assembly
rail
9-19
rail
Protrusion
Protrusion
F-9-34 F-9-34
9-19