Disassembling And Assembling Of The Hdd Removed From Host Machine - Canon imageRUNNER ADVANCE 8105 Series Service Manual

■
Disassembling and Assembling of the HDD Removed from the
Host Machine
1) Disassemble the removed HDD.
•
4 Screws (W Sems)
• 1 Screw (TP)
•
1 HDD Grounding Plate
•
1 HDD Support Plate
x4
TP
HDD Grounding Plate
CAUTION: Points to Note at Installation
Be sure to install the HDD Connector to the side with screw holes of the HDD
Connector Plate.
Label
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Disassembling and Assembling of the HDD Removed from the Host Machin
HDD
HDD Support Plat
F-9-250 F-9-250
Screw Hole
Connector
Screw Hole
F-9-251 F-9-251
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Disassembling and Assembling of the HDD Removed from the Host Machin
MEMO:
Use the parts disassembled in step 1) and parts included in the Removable HDD Kit.
2) Assemble the HDD disassembled in step 1).
•
1 HDD Support Plate
• 1 HDD Connector Plate (Included in the Removable HDD Kit)
•
1 HDD
•
1 HDD Grounding Plate
• 4 Screws (W Sems) (Tighten one of the 1 screw together with the HDD Grounding Plate)
•
1 Screw (TP)
x5
TP
HDD Grounding
Plate
9-113
HDD
Connector
HDD Connector
Plate
HDD Support Plate
F-9-252 F-9-252
9-113