4) Remove the rail from the HDD Case Unit.
•
2 Screws (The removed screws will be used in step 6.)
x2
5) Remove the Leaf Spring from the removed rail. (The removed Leaf Spring will not be used.)
•
2 Bosses
•
1 Arm
Boss
Boss
Turn over
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Changing Configuration insi
6) Install the HDD Lock Pin and the HDD Lock Spring to the rail, and install the rail to the HDD
Case Unit.
•
2 Bosses
•
2 Screws (Use the screws removed in step 4).)
F-9-685
7) Install the HDD Drawer Unit to the HDD Case Unit.
Arm
•
2 Screws (TP Round End; M3x6)
F-9-686
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Changing Configuration insi
Hole
Hole
x2
Boss
Boss
x2
9-337
F-9-687
F-9-688
9-337