Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1027

25) Secure the AC cord to the cord mount.
1 screw with flat spring
•
26) Reatach the exterior covers of the host machine in the following sequence;
[1] Rear Lower Cover
•
3 screws (RS-tight; M4x10)
[2] Close the Controller Box.
•
4 screws (RS-tight; M4x10)
[3] Connect the Reader Communication Cable.
• 1 claw
•
1 protrusion
[4] Fix the Harness.
• 2 wire saddles
27) Close the deck compartment.
Manually slide the paper deck to the left place in aside of the host machine.
9
Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-C1)
28) Stick the power supply label on the rear panel of the paper deck.
x1
F-9-150 F-9-150
29) Fix the paper deck cable in the wire saddle and joint the connector to the host machine.
9
Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-C1)
9-65
F-9-151 F-9-151
x1
x1
F-9-152 F-9-152
9-65