Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1148

Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.
Installation Procedure
■
Removing the Covers
1) Push [A] part, and open the Right Rear Cover 1.
[A]
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the Covers
2) Remove the Side Cover.
• 1 Screw
•
2 hooks
3) Free the Reader Communication Cable and the Reader Power Supply Cable from the 2
Wire Saddles.
4) Remove the Left Rear Cover.
•
2 Protrusions
F-9-378
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the Covers
Hook
Hook
F-9-379
x2
Protrusion
F-9-380
9-186
9-186